THE DETERMINATION OF THE COMPUTATIONAL DEGREES OF FREEDOM OF BAR SYSTEMS1)

为了简化和统一结构力学教材中杆件体系计算自由度$W$的算法,本文提出了“直接法”。该方法以相邻节点间的杆件和结点为分析对象,对于含$m$根杆件、$g$ 个单刚结点和$h$个单铰结点的平面杆件体系,直接法给出计算自由度公式$W=3m-(3g+2h$)。相比于已有方法,直接法研究对象清晰,数学运算统一,适合于编程计算,便于初学者准确而快速计算复杂体系的$W$;也为结构超静定次数的确定提供了一种简单有效的数值算法。     

管式炉中半导体激光器巴条Au80Sn20焊料封装研究

为了提高半导体激光器的封装质量和效率,引入管式炉利用夹具进行批量封装。由于封装质量的好坏直接影响半导体激光器的输出特性和使用寿命,利用MOCVD生长808 nm芯片,重点分析了管式炉温度和封装时间对半导体激光器巴条双面金锡封装质量的影响。利用X射线检测、结电压、光电特性参数和smile效应测试手段,确定了管式炉封装半导体激光器巴条的最优封装条件,为以后的产业化提供了指导意义。     

Role of compositional changes on thermal,magnetic,and mechanical properties of Fe-P-C-based amorphous alloys

This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic features,and mechanical properties.Considering minor addition of elements into the system,it was found that the simultaneous microalloying of Ni and Co leads to the highest GFA,which was due to the optimization of compositional heterogeneity and creation of near-eutectic composition.Moreover,the FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior under the nanoindentation test,which was owing to the intensified structural fluctuations in the system.However,the improved plasticity by the extra Cu addition comes at the expense of magnetic properties,so that the saturation magnetization of this alloying system is significantly decreased compared to the FeCoPC amorphous alloy with the highest soft magnetic properties.In total,the results indicated that a combination of added elemental constitutes,i.e.,Fe69Co5Ni5Cu1P13C7 composition,provides an optimized state for the comprehensive properties in the alloying system.     

Well‐posedness of initial boundary value problems on longitudinal impact on a composite linear viscoelastic bar

We investigate the correctness of the initial boundary value problem of longitudinal impact on a piecewise‐homogeneous semi‐infinite bar consisting of a semi‐infinite elastic part and finite length visco‐elastic part whose hereditary properties are described by linear integral relations with an arbitrary difference kernel. Introducing nonstationary regularization in boundary conditions and in the contact conditions, the well‐posedness of the considered problem is proved. Copyright © 2017 John Wiley & Sons, Ltd.     

冲击作用下凝聚态含能材料热点形成热－机械分析

应用动力有限元方法分析含能材料中热点形成机理。在假定凝聚态含能材料为可压缩的情况下，研究圆形和椭圆形微孔洞附近介质在冲击作用下热－机械响应过程，结果显示冲击波强度、空隙率、微孔洞尺寸和形状、熔点对热点温升有强烈影响，并讨论粘塑性功和固相压缩成为主要机制的条件。     

粘塑性薄壁管中复合应力波的传播特性研究

以本构关系一般理论为基础,导出了计及材料功硬化效应和应变率硬化效应的粘塑性薄壁管的本构关系及管中复合应力波的控制方程,应用有限差分方法研究了在压扭复合冲击载荷作用下粘塑性薄壁管中复合应力波的传播特性与演化规律,分析了复合应力波的耦合效应以及薄壁管中粘塑性参数和功硬化效应对复合应力波传播与演化规律的影响,并对有关现象进行了分析和解释。     

多功能Hopkinson压杆型试验装置的研制与应用

对传统的Hopkinson压杆试验装置进行了改进和完善，除了用于材料的动态压缩以外，还能进行动态拉伸、绝热剪切、裂纹扩展速度测定、动态断裂韧性测试等．本文介绍了几种试验方法的基本原理，并给出了试验结果．     

考虑疲劳裂纹扩展三维效应的James—Anderson修正方法

James-Anderson方法是一种借助材料疲劳裂纹扩展速率性能来确定三维裂纹应力强度因子的重要实验方法。本文对James-Anderson方法中的疲劳裂纹扩展三维效应进行了分析，并对其进行修正。修正后的James-Anderson方法考虑了疲劳裂纹扩展中由于应力状态而引起的三维效应。研究结果表明：和James-Anderson方法相比，修正后的James-Anderson方法得到的应力强度因子和三维数值方法所得的应力强度因子更吻合。     

ASYMPTOTIC DYNAMIC SOLUTION TO THE MODE Ⅰ PROPAGATING CRACK-TIP FIELD IN ELASTIC-VISCOPLASTIC MATERIAL

A new elastic-viscoplastic mode was proposed to analyze the stress and strain fields surrounding the tip of a propagating mode Ⅰ cracks. A proper displacement pattern was suggested and asymptotic equations were derived, and numerical solutions were illustrated. The analysis and calculation show that the crack-tip field is of logarithmic singularity for smaller viscosity, however no solution exists for large viscosity. By a careful analysis and comparison, it is found that the present results retain all merits of those given by Gao Yu-chen, while removing existing problems.     

An optimisation method for separating and rebuilding one-dimensional dispersive waves from multi-point measurements. Application to elastic or viscoelastic bars

When using a classical SHPB (split Hopkinson pressure bar) set-up, the useful measuring time is limited by the length of the bars, so that the maximum strain which can be measured in material testing applications is also limited. In this paper, a new method with no time limits is presented for measuring the force and displacement at any station on a bar from strain or velocity measurements performed at various places on the bar. The method takes the wave dispersion into account, as must inevitably be done when making long time measurements. It can be applied to one-dimensional and single-mode waves of all kinds propagating through a medium (flexural waves in beams, acoustic waves in wave guides, etc.). With bars of usual sizes, the measuring time can be up to 50 times longer than the time available with classical methods. An analysis of the sensitivity of the results to the accuracy of the experimental data and to the quality of the wave propagation modelling was also carried out. Experimental results are given which show the efficiency of the method.